Snow Peak products for sale at Expedition Exchange Incorporated outdoor camping 4x4 overlanding
Snow Peak Charcuterie Plate (TW-040)

Snow Peak Charcuterie Plate (TW-040)

Don't make the rookie mistake of putting effort into your food, only to serve it on a plastic cutting board or paper plates. The beautiful Snow Peak Charcuterie Plate is perfect for serving meats, fruits, cheeses, and crackers as a snack or before a meal with cocktails. The Charcuterie Plate measures 10" x 7" x 5/8" and is constructed of beautiful oak that is noticeably darker than the usual Snow Peak bamboo. At 1.25 lbs., it is quite heavy for its size. One side is grooved at the edge to catch juices while the opposite side is smooth for use as a cutting board. A hole in the corner lets you hang dry it after washing.


If you like the look and feel of oak, take a look at some of our other oak products:


Snow Peak Part Number -  TW-040

Universal Product Code -  4960589006397







SNOW PEAK INFLATABLE MATTRESS MOUNTAIN LARGE (TM-072) is an inflatable air mattress sleeping pad.

Snow Peak Inflatable Mattress Mountain Large (TM-072)

The Snow Peak Inflatable Mattress Mountain Large is an inflatable air mattress sleeping pad that provides additional padding and insulation under your sleeping bag.


Snow Peak Part Number -  TM-072

Universal Product Code -  4960589121908










SNOW PEAK FLAT BURNER (GS-450)

Snow Peak Flat Burner (GS-450)

The Snow Peak Flat Burner is a thinner and lighter version of the famous Snow Peak Baja Burner. The Flat Burner weighs 4.2 lbs. while the Baja Burner weighs 5.9 lbs. The Baja Burner's legs flip out like that of a lunar lander, while the Flat Burner's legs attach like the BBQ Box's legs. Unlike the Baja Burner, the Flat Burner cannot run on liquid fuel with the gas canister inverted. Otherwise, the two stoves are very similar and serve similar functions. Both stoves may be used standalone or as part of Snow Peak's Iron Grill Table System


A key feature that distinguishes the Flat Burner from other burners is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS Power Gas, and numerous other systems. Thus, the Flat Burner will use the same fuel as the rest of your outdoor products like lanterns, lighters, small stoves, and so on. Gas regulator and integral piezo igniter are included.

 

The Flat Burner is also capable of adaptation with the various Kovea gas adapters. The Kovea LPG Adapter will let you run the Flat Burner on the commonly available Coleman 1 lb. propane canisters, and the Kovea CB Adapter will let you run the Flat Burner on the commonly available and very inexpensive CB butane canisters found at Asian markets.


A very elegant way to transport the Flat Burner is the Snow Peak Utility Bag S Unit.


If you cook for larger numbers of people and want the capability of two burners, take a look at the Snow Peak Standard Model Two Burner. Of course you could double-down on the Flat Burner and achieve the same result, but the Standard Model Two Burner is convenient with the two burners connected and also has a windscreen.


Snow Peak Part Number -  GS-450

Universal Product Code -  4960589011223





SNOW PEAK PEG HAMMER CASE (UG-021)

Snow Peak Peg Hammer Case (UG-021)

The Snow Peak Peg Hammer Case stores and transports your Snow Peak Stakes and Peg Hammer PRO.C, and keeps them together and organized. The flap stays closed with Velcro and prevents your stakes from rattling about or damaging other pieces of your gear. Compatible with both Solid Stake 40 and Solid Stake 30 sizes and holds up to eight stakes.


Snow Peak Part Number -  UG-021

Universal Product Code -  4960589110339







SNOW PEAK GRILL BURNER SEPPO-EN (GS-355)

Snow Peak Grill Burner Seppo-en (GS-355)

The Snow Peak Grill Burner Seppo-en is a gas-powered grill pan that works standalone or as part of the Snow Peak Iron Grill Table System. The idea behind the Grill Burner is to combine the the Snow Peak Cast Iron Half Griddle and Snow Peak Baja Burner to create camp food that is very healthful, but still rustic in nature and delicious. When the cast-iron grill pan is removed, the Grill Burner acts just like a standard gas burner, so the Grill Burner is not some specialized tool with only one purpose and limited utility in your field kitchen.


The heart of the Grill Burner system is the cast iron grill pan. The grill pan is thick and heavy at 6 lbs. (more than half of the Grill Burner's 11 lbs. total weight) for heat retention and even cooking of your meats and vegetables. The corrugated surface of the grill pan serves two functions: (1) put beautiful sear marks on your food for the outdoorsy and rustic feel that good camp food has; and (2) facilitate drainage of fats. Unlike a standard grill pan, this grill pan is shaped like an inverted rooftop to let cooking fats and juices drain away into the drip pan situated below the fire, so fats and fat-calories in your camp meals are minimized. And because the fats drip into the drip pan rather than onto the fire, there are no flare-ups to burn your food and create possible carcinogens.


With the grill pan removed, the Grill Burner will act like a regular gas burner that will:

  • accommodate pots and pans up to 12" in diameter/length
  • work as a standalone gas burner on a tabletop or ground
  • integrate with the Iron Grill Table System


The majority of the Grill Burner is constructed of stainless steel for corrosion resistance and easy cleaning. However, the cast iron grill pan is rightly made of carbon steel to accept a proper seasoning, and the drip pan is sheetmetal that has been coated with baked-on, non-stick paint to let fats pour away easily. Just as with all cast iron, season your grill pan to make it nonstick and reseason it if you ever clean the grill pan with soap. The Grill Burner easily breaks down into its elements for cleaning. A black nylon carry bag with Fastex buckle keeps everything together during storage and transport.


The Grill Burner's unique grill-fire design represents one way to cook, and there is no single, "best" way to cook camp meals. If outdoor cooking to you must include grilling and the smoky smell and taste that only a charcoal fire can deliver, look at the Snow Peak IGT BBQ Box, Double IGT BBQ Box, and Pack & Carry Fireplace Kit. If you like to cook camp breakfasts on a skillet or hearty stews in a pot, look at the Snow Peak Baja Burner or Standard Model Two Burner. Or, combine either of those burners with the Snow Peak Cast Iron Half Griddle to create what is essentially the Grill Burner. If you like to cook camp meals in a dutch oven, look at the Snow Peak Japanese Cast Iron Oven 26cm. There is no single or "best" way.


Snow Peak Part Number -  GS-355

Universal Product Code -  4960589181698





SNOW PEAK INNER SCREEN FOR CAST IRON 26CM (CS-521)

Snow Peak Inner Screen For Japanese Cast Iron Oven 26CM (CS-521)

The Snow Peak Inner Screen For 26CM is a steel grill net made for the Snow Peak Japanese Cast Iron Oven 26cm (10" dutch oven). The Inner Screen raises the food contents off the floor of the dutch oven's bottom pot or middle skillet to minimize burning of the food when cooking over very hot charcoal. The Inner Screen's 8" diameter may also be used as a drying rack for some meats before cooking them in order to minimize steaming and maximize crusting on your finest steaks. Use your imagination and many other ideas will occur to you. The Inner Screen is constructed of stainless steel for corrosion resistance and easy cleaning.


Like the Snow Peak Japanese Cast Iron Oven 26cm Charcoal Stand, the Inner Screen stores and transports inside your 10" dutch oven or the Snow Peak Dutch Oven Case M to minimize the packed size of your dutch oven and prevent the dutch oven's accessories from getting separated from the mother ship when it is not in use.


Snow Peak Part Number -  CS-521

Universal Product Code -  4960589183937







image5

Snow Peak Lifter Pro Set For Japanese Cast Iron Dutch Oven (N-021)

The Snow Peak Lifter Pro facilitates handling of the Snow Peak Japanese Cast Iron Oven 26cm, which has three different pieces that may be oriented or combined in different ways to suit different foods. Some of the Dutch Oven's pieces have handles while others do not. The Lifter Pro makes handling these different pieces much easier. The Lifter Pro consists of a large tool and small tool. The large tool's jaw will engage the center handle on the Dutch Oven's top lid and enable the user to lift the lid straight up without spilling any hot charcoal. The large tool will also let you dump the hot charcoal from the lid if you desire. The Dutch Oven's top lid has a center handle but the middle skillet does not because it may be inverted to make the Dutch Oven's capacity larger or smaller. The Lifter Pro's small tool acts in conjunction with the large tool to engage the wing handles on the skillet to lift it from the sides. Both the large and small tools feature bamboo handles for beauty and heat insulation. The bamboo handles are riveted onto the steel bodies. A No. 10 cotton canvas storage bag is included. The storage bag closes with velcro and has a wrist lanyard.


Like the Dutch Oven Case M and Charcoal Stand, the Lifter Pro will become indispensable for every owner of the Snow Peak Dutch Oven.


Snow Peak Part Number -  N-021

Universal Product Code -  4960589112876







SNOW PEAK DUTCH OVEN CASE M (CS-420BR)

Snow Peak Dutch Oven Case M (CS-420BR)

As its name would suggest, the Snow Peak Dutch Oven Case M is designed for storing and transporting the Snow Peak Japanese Cast Iron Oven 26cm dutch oven and its accessories. The case keeps the heavy dutch oven pieces snug against one another so that they do not bounce around while fourwheeling and damage themselves or the other pieces in your field kitchen. Construction is of heavy-duty canvas and all edges and seams are double-layered canvas to prevent them from fraying, unraveling, or pulling apart. The case is a "soft" case, but the bottom has two layers of stiffeners to prevent the case from losing its shape, and the interior stiffening layer is rigid plastic to resist abrasion from the bottom of the dutch oven. The heavy canvas carry straps go all the way under the case and crisscross under it to help support the weight of a heavy dutch oven and its accessories. The inside of the zippered lid has two mesh accessory pockets to keep smaller items organized and easily accessed. 

 

The Dutch Oven Case M will also hold and transport of the Kovea 2 Way Gas BBQ burner/grills, which makes for a very organized and compact mix of gas burners and gas grills.


Snow Peak Part Number -  CS-420BR

Universal Product Code -  4960589112661







SNOW PEAK CAST IRON 26CM CHARCOAL STAND (CS-522)

Snow Peak Japanese Cast Iron Oven 26CM Charcoal Stand (CS-522)

The Snow Peak Japanese Cast Iron Oven 26cm does not have the traditional cast-iron legs like many dutch ovens for cooking over charcoal. This is by design and offers several very real advantages for off-road use:


  • Dutch ovens with integral legs will eventually wear through aluminum, wood, and polymer kitchen boxes from the bumping and shaking that are inevitable with fourwheeling. 
  • Dutch ovens will bounce around and tend to break one or more of the cast-iron legs (which were never designed to withstand such impacts). 
  • Dutch ovens with integral legs are inherently taller and take up more space in your already-tight field kitchen
  • Dutch ovens with integral legs are clumsy to use over burners. 


Snow Peak's solution to these problems was to remove the legs all together and offer a separate stand. The Charcoal Stand will raise the Japanese Cast Iron Oven 26cm by 2.5" and give plenty of clearance underneath for charcoal cooking. When you want to use your dutch oven over a burner, just don't use the Charcoal Stand.

 

Snow Peak's design philosophy often involves nesting and stacking to minimize bulk and maximize storage space, and the Charcoal Stand stores and transports inside the dutch oven. Space in your field kitchen is maximized because an extra 2.5" of height is gained by having a separate Charcoal Stand. Furthermore, the Charcoal Stand is less likely to get misplaced because it has a proper and intuitive home inside the dutch oven.


The Charcoal Stand also serves as a general stand for hot pots and pans. Use your imagination and many other uses will occur to you.


Snow Peak Part Number -  CS-522

Universal Product Code -  4960589183968







SNOW PEAK JAPANESE CAST IRON OVEN 26CM (CS-520)

Snow Peak Japanese Cast Iron Oven 26cm

The Snow Peak Japanese Cast Iron Oven 26cm is a 10" dutch oven that is composed of three pieces that can be stacked in different ways to suit different contents or cooking methods. All three pieces are constructed using Snow Peak's proprietary ultra-thin casting technology, which enables the pieces to be as thin as 2.25mm and also be compatible with induction stovetops. The material is cast iron, but there is no visible porosity in the material and the surface is very smooth. After seasoning with oil, the pieces take on a very glossy look because the cast iron is so smooth. These are high-technology pieces, but the technology is hidden.


The bottom pot is rounded on the bottom to speed up cooking times. The middle skillet may stack on the pot in either direction to maximize cooking space in the pot (such as for a chicken) or to minimize it (such as for biscuits). The top lid stacks on both the skillet and pot. Both the lid and skillet are rimmed to hold charcoal on top for additional cooking heat, and the skillet will hold charcoal in either orientation.


The pot has two wire handles that fold up so that you can carry the assembled dutch oven pieces easily like a suitcase, and also fold down to provide easy access to the food. The skillet and top have wings on the side for easier handling when they are hot. The pot does not have the traditional cast-iron legs like most dutch ovens for cooking over charcoal. Instead, Snow Peak offers a separate Snow Peak Japanese Cast Iron Oven 26cm Charcoal Stand that stores and transports inside the pot. The charcoal stand will raise the pot when you want to cook over charcoal and remove for cooking over burners or during transport. This two-piece arrangement is a very real advantage for fourwheelers because heavy dutch ovens with integral legs will eventually wear through aluminum, wood, and polymer kitchen boxes from the bumping and shaking that are inevitable with fourwheeling. Your field kitchen's case will get torn up, or the heavy dutch ovens will bounce and break one or more of the cast-iron legs. Snow Peak's two-piece system works just as well for cooking over coals, but offers greater durability for both the dutch oven and your field kitchen.

 

Weight for the complete kit is 16.8 lbs. and the dimensions are 10.6" wide x 5.8" tall with the top lid inverted or 7.3" tall with the top lid stacked with handle up. The pot's capacity is 1.4 gallons and the skillet's is 0.6 gallons.


If you are cooking over very hot charcoal and want to raise your food contents off the floor of the dutch oven, look at the Snow Peak Inner Screen For Japanese Cast Iron Oven 26cm. The Inner Screen is a steel grill nets fits both the bottom pot and middle skillet of the dutch oven and prevent foods from burning or overcooking. The Inner Screen will store and transport inside your dutch oven and always be there for when you want to use it.


To transport your dutch oven, look at the Snow Peak Dutch Oven Case M, which will keep the dutch oven's heavy pieces together and protect them as well as the other pieces in your field kitchen.


To handle the dutch oven's hot and heavy pieces, Snow Peak offers the Lifter Pro Set. The set's large and small tools will let you remove the dutch oven's lid even when it is filled with charcoal, and also let you handle the skillet.

 

The Japanese Cast Iron Oven 26cm is an "oven" in the sense that it is a dutch oven. If you want a more typical oven in your field kitchen, take a look at the Snow Peak Field Oven, which fits on top of the Snow Peak Pack & Carry Fireplace Kit.


Snow Peak Part Number -  CS-520

Universal Product Code -  4960589183852







SNOW PEAK TITANIUM MINI FORK (SCT-130)

Snow Peak Titanium Mini Fork (SCT-130)

The Snow Peak Mini Titanium Fork is the short version of the standard titanium fork that comes with the Snow Peak Wapper Buki Titanium Full Cutlery Set. As with most Snow Peak products, the Mini Titanium Fork integrates with other Snow Peak products. For example, the Mini Titanium Fork stacks perfectly with the Snow Peak Titanium Mini Solo Combo 2.0 to form a mini mess kit.

Alternatively, the Mini Titanium Fork will also fit into the nylon carry case of the Snow Peak Wabuki Carry-on Chopsticks L to form a mini cutlery set that is transported very easily. The Mini Titanium Fork measures just 4.5" long and weighs only 12g, so you hardly even notice it's there.


The Mini Titanium Fork is constructed entirely of titanium, which is the perfect travel utensil material. Titanium is very lightweight (unlike stainless steel), has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic foods (unlike aluminum and stainless steel), and is very strong and will not melt or break (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary.


Snow Peak Part Number -  SCT-130

Universal Product Code -  4960589002917







SNOW PEAK IGT HANGING RACK FRAME 2 STAGE (CK-220)

Snow Peak IGT Hanging Rack Frame 2 Stage (CK-220)

The Snow Peak IGT Hanging Rack Frame 2 Stage hangs from your Iron Grill Table Frame and provides two additional levels and four additional IGT Units, and puts them into what was previously wasted space below your frame. In essence, the Hanging Rack Frame will turn a three-unit IGT frame into a seven-unit IGT frame.


The Hanging Rack Frame consists of four steel pieces--two vertical and two horizontal. The vertical pieces hang from the Iron Grill Table Frame and the two horizontal pieces hook into the vertical pieces. Each horizontal piece will hold two IGT Units, or "W" in Snow Peak parlance. For example, you could fit two of the Snow Peak Stainless Box S Units to one horizontal piece for extra storage while the other held a Snow Peak Wood Table W Bamboo as a utility shelf. Play around with your Iron Grill Table System and many different ideas will come to you. 


The IGT Hanging Rack Frame 2 Stage is constructed entirely of riveted steel and weighs 10 lbs. When disassembled into its four component parts and nested, the Hanging Rack Frame measures approximately 21" x 14" x 2". Weight capacity is 44 lbs. Storage bag is included.


Snow Peak Part Number -  CK-220

Universal Product Code -  4960589000722




SNOW PEAK LARGE FIREPLACE CAST IRON CHARCOAL BED (ST-032S)

Snow Peak Large Fireplace Cast Iron Charcoal Bed (ST-032S)

The Snow Peak Large Fireplace Cast Iron Charcoal Bed fits into the Snow Peak Pack & Carry Fireplace Kit and is designed to optimize the burning of charcoal by getting free-flowing air under the charcoal. Charcoal placed inside the Fireplace without the Charcoal Bed would collect at the bottom and not burn efficiently. Charcoal sits on the Charcoal Bed and is raised off the Fireplace's floor, improving air circulation and combustion. The Cast Iron Charcoal Bed is also suitable for holding a Dutch oven or pot inside the Fireplace. When cooking with wood over the raised grill bridge, the Cast Iron Charcoal Bed can also raise your wood to be closer to your food. And when baking with the Snow Peak Field Oven, the Cast Iron Charcoal Bed will ensure your charcoal burns at its hottest and most even rates. Constructed of cast iron, the Charcoal Bed is capable of withstanding the very high heat of charcoal fires and campfires without warping. The Large Fireplace Cast Iron Charcoal Bed measures 12" x 12" x 0.8" and weighs 9.3 lbs.


Snow Peak Part Number -  ST-032S

Universal Product Code -  4960589141746







SNOW PEAK IGT DOUBLE BBQ BOX (CK-160)

Snow Peak IGT Double BBQ Box (CK-160)

The Snow Peak IGT Double BBQ Box is a charcoal grill that may be used standalone or as part of Snow Peak's modular Iron Grill Table System. Made entirely of stainless steel, the Double BBQ Box is easy to use, easy to clean, and durable. To use, simply fill the removable pan with charcoal and drop your favorite meal on top of the removable grill nets. The double grill nets can be raised or lowered with a hand crank to increase or decrease cooking heat as desired. The Double BBQ Box's legs and hand crank detach and stow in the charcoal pan to minimize wasted storage space, and a stainless steel lid is provided to hold the entire assembly together during storage or transport. The Double BBQ Box is entirely self-contained and measures only 20" x 15" x 5" when stowed. 

 

The Double BBQ Box is basically a double version of the Snow Peak IGT BBQ Box with some small differences:

  • the Double BBQ Box fills in two IGT units (or "W" in Snow Peak parlance) while the BBQ Box fills one IGT unit (or "S" in Snow Peak parlance)
  • the legs on the Double BBQ Box stow in the charcoal pan while the legs on the BBQ Box invert and store outside the body
  • the Double BBQ Box uses a hand crank to adjust the height of the grill nets (charcoal pan stays stationary) while the BBQ Box uses a lever to adjust the height of the charcoal pan (grill net stays stationary)
  • the Double BBQ Box has no real lid to cover foods while cooking while the BBQ Box has a shallow lid


A very easy and elegant way to transport the Double BBQ Box is inside the Snow Peak Double Burner Case, which will also hold the Snow Peak Double Burner.

 

To light the charcoal for your Double BBQ Box, look at the Snow Peak Folding Torch or the Kovea Charcoal Starter. Like the Double BBQ Box, the Kovea Charcoal Starter is constructed of stainless for easy maintenance and also folds flat for compact storage and transport. In fact, the Charcoal Starter will even nest inside the Double BBQ Box for very tight storage and transport, and also to ensure the two do not get separated inadvertently.


The Double BBQ Box is modular and designed to work with other Snow Peak items. It comes standard with yakitori-style grill nets, but will also accept:


Snow Peak Part Number -  CK-160

Universal Product Code -  4960589141296







SNOW PEAK IGT SLIDE TOP HALF (CK-153T)

Snow Peak IGT Slide Top Half (CK-153)

The Snow Peak IGT Slide Top Half adds working or dining tabletop space to your Iron Grill Table System by sliding into the sides of the frame. Extruded mounting hooks are integral with the bamboo platform and slide into the corresponding hooks on the Iron Grill Table frame. The platform is constructed of Snow Peak's signature bamboo laminate that is branded and coated in a semigloss finish. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. Bamboo is also warm to the touch and very beautiful. Each Slide Top Half measures 16.8" x 8.6", so each Slide Top Half will span exactly "half" of the width of a three-unit Iron Grill Table frame. Conversely, each three-unit Iron Grill Table frame will accept up to four of the Slide Top Halves at once.


The Slide Top Half will enlarge your Iron Grill Table frame from front to back. To enlarge your Iron Grill Table from side to side, look at the Snow Peak IGT Multi Function Table Bamboo, which has the same length and width as a three-unit Iron Grill Table frame and clips onto the side of the IGT frame or another Multi Function Table Bamboo to create as much tabletop space as you could ever really want in a field kitchen.


Snow Peak Part Number -  CK-153T

Universal Product Code -  4960589141234







SNOW PEAK CAST IRON HALF GRIDDLE (GR-015)

Snow Peak Cast Iron Half Griddle (GR-015)

The Snow Peak Cast Iron Half Griddle is sort of the George Foreman Grill of the Snow Peak Universe and Snow Peak's attempt to create a griddle for the most healthful camp foods possible. The Cast Iron Half Griddle is raised in the middle and lowered on the sides to allow fat to drain away from your food and into the side reservoirs. Fat and fat-calories in your food are minimized, and because the fat drains to the sides rather than into your fire, there are no flare-ups to burn your food and create possible carcinogens. The Cast Iron Half Griddle measures 13.5" x 8.5", and two of them will fit onto the Snow Peak Large Pack & Carry Fireplace or Snow Peak IGT Double BBQ Box. Weight is five pounds because of the thick, cast-iron construction. Carry case included.


If you want to use something like the Cast Iron Half Griddle over a gas burner on your Iron Grill Table System, Snow Peak has available the Snow Peak Grill Burner Seppo-en, which is a sloped cast-iron grill pan that sits over a gas burner and drip pan. The integrated assembly will work standalone or as part of the IGT frame.


Snow Peak Part Number -  GR-015

Universal Product Code -  4960589192342






SNOW PEAK IRON GRIDDLE (GR-006)

Snow Peak Iron Griddle (GR-006)

The Snow Peak Iron Griddle is a flat top that is sized to work with your other Snow Peak items. The Iron Griddle measures 330mm x 500mm x 35mm and will drop onto your Snow Peak Large Fireplace Grill Bridge, Snow Peak Double Burner, and Snow Peak IGT Double BBQ Box. The Iron Griddle weighs 7.4 lbs to store and distribute heat as evenly as possible while still being easily transported. Treat the Iron Griddle like cast iron and keep it properly seasoned for corrosion resistance and non-stick properties.


Snow Peak Part Number -  GR-006

Universal Product Code -  4960589192069








SNOW PEAK PACK & CARRY FIREPLACE KIT (ST-032SET)

Snow Peak Pack & Carry Fireplace Kit (ST-032SET)

The Snow Peak Pack & Carry Fireplace Kit is a convenient and cost-effective way to put together a large fireplace. The Pack & Carry Fireplace Kit is composed of the following pieces:

  • Snow Peak Large Fireplace Grill (ST-032MA) 
  • Snow Peak Large Fireplace Grill Bridge (ST-032GB)
  • Snow Peak Large Pack & Carry Fireplace (ST-032)
  • Snow Peak Large Fireplace Baseplate (ST-032BP)
  • Snow Peak Large Fireplace Complete Carrying Case (ST-032BR)


All of the pieces stack and nest into the Complete Carrying Case to form an elegant and convenient package. The Pack & Carry Fireplace Kit represents about a $75 savings over buying the five pieces separately, and avoids the headache of long backorders and unavailable components.

 

The Pack & Carry Fireplace Kit is modular and designed to work with other Snow Peak items. It comes standard with the Snow Peak Large Fireplace Grill, but will also accept:


If you want to the ability to bake in your field kitchen, the Snow Peak Field Oven fits on top of the Pack & Carry Fireplace Kit to form a fully functional oven.


Snow Peak Part Number -  ST-032SET

Universal Product Code -  4960589143863







SNOW PEAK FIELD OVEN (CS-390)

Snow Peak Field Oven (CS-390)

The Snow Peak Field Oven fits on top of the Snow Peak Pack & Carry Fireplace Kit to form a fully functional field oven. The Field Oven is composed of the following pieces:

  • oven unit
  • oven rack
  • ceramic tray
  • lifter
  • ceramic tray case
  • cargo straps


The various pieces nest into the oven unit and the entire oven kit measures 18" x 18" x 6". Weight is 15 lbs.

 

If you plan to cook with charcoal, be sure to order the Snow Peak Large Fireplace Cast Iron Charcoal Bed to raise your charcoal closer to the oven and maximize burning efficiency of your charcoal by preventing it from clumping at the bottom of the Fireplace.


The Field Oven is suitable for cooking "low" foods like pizzas. If you want an oven for cooking meats or stews, look at the Snow Peak Japanese Cast Iron Oven 26, which is a 10" dutch oven.


Snow Peak Part Number -  CS-390

Universal Product Code -  4960589002702







SNOW PEAK PEG HAMMER PRO.C (N-001)

Snow Peak Peg Hammer PRO.C (N-001)

The Snow Peak Peg Hammer PRO.C is a copper-faced hammer designed for driving stakes into the ground without damaging the stakes. The Peg Hammer's soft copper striking face is designed to deform and peen rather than peening the stakes (the copper striking face is replaceable after several years of hard use), which also decreases the pounding to the user's hand. The Peg Hammer is constructed with a steel head and oak handle. The forged steel head features a hook for removing the Snow Peak Solid Stakes from the ground, and an eyelet for removing conventional stakes with hooked heads. The oak handle is reinforced with steel plates and rivets where it plugs into the hammer's head. The octagonal cross section of the handle lets the user deliver powerful and accurate blows, and the wooden handle transmits the blows effectively. The Peg Hammer also makes an excellent general-purpose hammer for field tool kits, as it will still deliver shocks and hard blows without damaging things like CV joints and other drivetrain components. A detachable wrist lanyard is included. The Peg Hammer PRO.C is 11.5" long and weighs 1.4 lbs.

 

If the Snow Peak Solid Stake 30 is Snow Peak's best product, then the Peg Hammer PRO.C is arguably Snow Peak's second-best product. This really is an excellent hammer.


The Snow Peak Peg Hammer Case stores and transports your Snow Peak Stakes and Peg Hammer PRO.C and keeps them organized. The Peg Hammer Case has a flap that stays closed with Velcro and prevents your stakes from rattling about or damaging other pieces of your gear.


Snow Peak Part Number -  N-001

Universal Product Code -  4960589162741







SNOW PEAK SOLID STAKE 30 (R-103)

Snow Peak Solid Stake 30 (R-103)

The Snow Peak Solid Stake 30 is a ground stake that you can depend upon to drive deeply and surely into the firmest ground and then stay there. The Solid Stake 30 is constructed of 55C steel material that is heated to 2000 degrees in a furnace and then forged into shape for maximum strength. The Solid Stake 30's unique head shape maximizes utility. The striking face is shaped with square edges to maximize driving force and to prevent slipping of the hammer's head on mis-hits. The eyelet mates with the hook on the Snow Peak Peg Hammer PRO.C for easy removal from the ground. The hook both secures line and sticks into the ground to prevent the Solid Stake 30 from rotating once driven fully into the ground. Everything about this stake is well thought out, and this is arguably Snow Peak's finest product. The Solid Stake 30 is 12" long and weighs 6 oz. Sold individually.

 

Snow Peak Part Number -  R-103

Universal Product Code -  4960589162420







SNOW PEAK MEDIUM FIREPLACE COMPLETE CARRYING CASE (ST-033BR)

Snow Peak Medium Fireplace Complete Carrying Case (ST-033BR)

The beautiful Snow Peak Medium Fireplace Complete Carrying Case is constructed of No. 8 canvas and is lined with PVC to prevent soiling and damage. The exterior of the Complete Carrying Case is fitted with a mesh accessory pocket. The Complete Carry Case is roomy enough to store and transport the following pieces:


A fully loaded Complete Carrying Case will still fit inside Pelican Products 1610 or larger Protector Case.

 

Snow Peak Part Number -  ST-033BR

Universal Product Code -  4960589112708







SNOW PEAK MEDIUM FIREPLACE GRILL BRIDGE (ST-033GB)

Snow Peak Medium Fireplace Grill Bridge (ST-033GB)

The Snow Peak Medium Fireplace Grill Bridge adjusts to three different heights to adjust the heat from the Snow Peak Medium Pack & Carry Fireplace for optimum cooking. The Medium Fireplace Grill fits onto the Grill Bridge and the Grill Bridge fits onto the Medium Fireplace. The Grill Bridge folds flat when not in use to take up a minimal amount of storage space and facilitate transport.

 

Snow Peak Part Number -  ST-033GB

Universal Product Code -  4960589141654







SNOW PEAK MEDIUM FIREPLACE GRILL (ST-033MA)

Snow Peak Medium Fireplace Grill (ST-033MA)

The Snow Peak Medium Fireplace Grill sits on top of the Snow Peak Medium Pack & Carry Fireplace and converts it from a fire pan to a grill. The Medium Fireplace Grill is constructed of chrome-plated steel. It measures 15.5" x 13.6" x 0.8" and weighs 2.4 lbs. For best grilling results, use the Fireplace Grill on top of the Snow Peak Medium Fireplace Grill Bridge to enable raising and lowering the grill to adjust heat.

 

Snow Peak Part Number -  ST-033MA

Universal Product Code -  4960589141814




SNOW PEAK MEDIUM FIREPLACE CAST IRON CHARCOAL BED (ST-033S)

Snow Peak Medium Fireplace Cast Iron Charcoal Bed (ST-033S)

The Snow Peak Medium Fireplace Cast Iron Charcoal Bed fits into the Snow Peak Medium Pack & Carry Fireplace and is designed to optimize the burning of charcoal by getting free-flowing air under the charcoal. Charcoal placed inside the Medium Fireplace without the Charcoal Bed would collect at the bottom and not burn efficiently. Charcoal sits on the Charcoal Bed and is raised off the Fireplace's floor, improving air circulation and combustion. The Cast Iron Charcoal Bed is also suitable for holding a dutch oven or pot inside the Fireplace. Constructed of cast iron, the Charcoal Bed is capable of withstanding the very high heat of charcoal fires and campfires without warping. The Medium Fireplace Cast Iron Charcoal Bed measures 10" x 10" x 0.8" and weighs 5.3 lbs.

 

Snow Peak Part Number -  ST-033S

Universal Product Code -  4960589141753







SNOW PEAK MEDIUM FIREPLACE BASE PLATE (ST-033BP)

Snow Peak Medium Fireplace Base Plate (ST-033BP)

Tread Lightly! principles dictate leaving no trace at all. The Snow Peak Medium Fireplace Base Plate collects ash that inevitably falls through the bottom of the Snow Peak Medium Pack & Carry Fireplace and also protects the ground from heat damage. Slots cut into the Base Plate mate with the legs of the Medium Fireplace and lock them into place for greater security against tipping the Medium Fireplace on uneven surfaces. The Medium Fireplace Base Plate measures 14.6" x 14.6" x 0.3" and weighs 3.4 lbs. 

 

Snow Peak Part Number -  ST-033BP

Universal Product Code -  4960589141685







SNOW PEAK MEDIUM PACK & CARRY FIREPLACE (ST-033R)

Snow Peak Medium Pack & Carry Fireplace (ST-033R)

The Snow Peak Medium Pack & Carry Fireplace is designed for areas without dedicated fire rings and where campfires are prohibited without a fire pan. (Making your own fire ring scars the earth and violates Tread Lightly! principles, so please don't do it.) The Medium Pack & Carry Fireplace allows enjoyment of a campfire and leaves no trace. Just dump in firewood and light it. The Medium Pack & Carry Fireplace is constructed of SUS304 stainless steel and will withstand the high heat of wood and charcoal fires without warping or other damage. In fact, the stainless steel will take on a beautiful coloration and patina after heavy use and only gets better with age. The Medium Fireplace folds flat to take up a minimum amount of storage space and to make transporting it easier. The Medium Pack & Carry Fireplace measures 13.8" x 13.8" x 9.8" open and 17.8" x 20.3" x 1.3" folded, so it will fit into a Pelican 1610 or larger Protector Cases. The Medium Fireplace weighs 7 lbs 11 oz. Lightweight nylon transport bag included. 

 

Snow Peak Part Number -  ST-033R

Universal Product Code -  4960589142668







SNOW PEAK CLASSIC KETTLE 1.8 (CS-270)

Snow Peak Classic Kettle 1.8 (CS-270)

The Snow Peak Classic Kettle 1.8 may be one of Snow Peak's most beautiful products and has many little details that make it a pleasure to use both in the field and at home. The double handle is very comfortable to use even when the Kettle is filled to capacity with boiling water. The spout cover folds closed to speed boiling and keep the contents hot. The spout cover locks in the open position and locks down the lid to facilitate pouring with the Kettle in one hand and a mug in the other. A hanging loop lets the user hang the Classic Kettle over an open fire during field use. Construction is all stainless steel to facilitate cleaning. 1.8L (60 oz.) capacity. 690g.


Snow Peak Part Number -  CS-270

Universal Product Code -  4960589182701






SNOW PEAK DOUBLE BURNER CASE (GS-220B)

Snow Peak Double Burner Case (GS-220B)

The Snow Peak Double Burner Case is a beautiful and useful way store and transport the Snow Peak Double Burner or Double Barbeque Box, plus a few extras. The Double Burner Case is constructed of heavy canvas to provide years of hard service. The case clamshells open and closed with two zippers. There is one large accessory pocket on the outside and two mesh accessory pockets on the inside.

 

Snow Peak Part Number -  GS-220B

Universal Product Code -  691688091291







SNOW PEAK STANDARD MODEL TWO BURNER (GS-220)

Snow Peak Standard Model Two Burner (GS-220)

For two-burner applications, whether standalone or as part of Snow Peak's Iron Grill Table System, the Snow Peak Standard Model Two Burner does an admirable job. The Standard Model Two Burner is large enough to fit the the two largest pots from the Snow Peak Heavy Duty Multi-Purpose Cook Set I, yet it weighs only 15.5 lbs and measures only 18.8" x 14 x 4.3" when stowed. The Standard Model Two Burner is also suitable for use with cast-iron griddles and grill pans, transforming this burner into a field griddle or grill. A key feature that distinguishes the Standard Model Two Burner from other burners is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS Power Gas, and numerous other systems. Thus, the Standard Model Two Burner will use the same fuel as the rest of your outdoor products like lanterns, lighters, small stoves, and so on. The Lindal Valve gas canisters merely thread onto the bottom of the burner. For even greater fuel versatility, fit the Standard Model Two Burner with the various Kovea Gas Adapters to run the stove on other types of common camp fuels. Two separate auto-igniters are fitted for easy ignition of the left or right burner. The burners feature a concave design that is effective with any pot size, and are controllable from a low simmer to the most raging heat outputs. The Standard Model Two Burner's body is attractively constructed with aluminum and stainless steel to facilitate cleaning, and its legs can be used for tabletop use with tabletop space remaining below the unit for extra space on small/low camp tables.

 

Snow Peak Part Number -  GS-220

Universal Product Code -  4960589710003







SNOW PEAK UTILITY BAG S UNIT (UG-078)

Snow Peak Utility Bag S Unit (UG-078)

As its name would suggest, the Snow Peak Utility Bag S Unit is designed for storing and transporting items that are one Iron Grill Table unit in size, like the Snow Peak Baja Burner or Flat Burner. (In Snow Peak Parlance, one IGT unit is "S" while two IGT units are "W". The Utility Bag S Unit holds one S unit.) There is enough room in the Utility Bag S Unit for a burner and something like a CK-125T bamboo insert. Or, you can dispense with the Baja Burner and carry several different bamboo inserts, stainless inserts, IGT BBQ Box grill grates and charcoal pans, IGT utility boxes, R-103 Stakes, N-001 Peg Hammers, and so on. Use your imagination and many ideas will occur to you. The Utility Bag S Unit is constructed of heavy canvas and has internal stiffeners, so it will keep its shape even when partially filled with heavy items of odd shape. The Velcro closure keeps the carry straps together and takes the weight off the fingers when carrying a heavy load. Dimensions are 15" x 10.5" x 5".

 

Snow Peak Part Number -  UG-078

Universal Product Code -  4960589112869







SNOW PEAK GIGAPOWER PLATE BURNER LI - BAJA BURNER - (GS-400)

Snow Peak Gigapower Plate Burner Li - Baja Burner - (GS-400)

For single-burner applications, whether standalone or as part of the Iron Grill Table System, the Snow Peak GigaPower Plate Burner Li (aka Baja Burner) serves admirably. When used in the standalone mode, the legs flip out with space remaining below the unit. The GigaPower Plate Burner Li is large enough to fit the the largest pot from the Snow Peak Heavy Duty Multi-Purpose Cook Set I, yet the GigaPower Plate Burner Li weighs only 5.9 lbs and displaces only one IGT unit. A key feature that distinguishes the GigaPower Plate Burner Li from other burners is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS Power Gas, and numerous other systems. Thus, the GigaPower Plate Burner Li will use the same fuel as the rest of your outdoor products like lanterns, lighters, small stoves, and so on. The GigaPower Plate Burner Li offers two modes of gas use. The canister may be inverted for very hot fires, or the canister may be stood up for low-temperature cooking or simmering. An igniter is integral with the unit, and the entire unit is constructed of stainless steel for easy cleaning. A drawstring pouch is included.

 

Snow Peak Part Number -  GS-400

Universal Product Code -  4960589194704







SNOW PEAK GRILL STAINLESS HALF PRO (S-029HA)

Snow Peak Grill Stainless Half Pro (S-029HA)

If the grill grate on your Snow Peak IGT BBQ Box or IGT Double BBQ Box is corroded, damaged, grungy, or otherwise just needs replacing, Snow Peak makes available the Grill Stainless Half Pro. The Grill Stainless Half Pro drops right into the IGT BBQ Box, as well as the grill bridges of the Double BBQ Box and Pack & Carry Fireplaces. Dimensions are identical to those of the standard grill in the IGT BBQ Box, but the wire is of thicker gauge and constructed of stainless steel to provide many years of service.


Snow Peak Part Number -  S-029HA

Universal Product Code -  4960589193769







SNOW PEAK GRILL PLATE HALF DEEP DEPTH (S-029HD)

Snow Peak Grill Plate Half Deep Depth (S-029HD)

The Snow Peak Grill Plate Half Deep Depth is a cooking pan for the Snow Peak IGT BBQ Box, Double BBQ Box, and Pack & Carry Fireplaces. It is constructed of thick carbon steel and weighs a relatively heavy 3.5 lbs. for good heat retention and even cooking. Usable space under the IGT BBQ Box's lid is doubled to 3.5" tall, so larger/thicker pieces of meat will fit than would otherwise fit on the standard yakitori grill. Smaller foods will never fall into the fire and flare-ups don't happen because the fats do not drip into the coals. The Grill Plate Half Deep conveniently stores and transports inside your IGT BBQ Boxes, so there is no space lost and the only penalty is weight.


Snow Peak Part Number -  S-029HD

Universal Product Code -  4960589720064







SNOW PEAK CUTTING BOARD SET L (CS-208)

Snow Peak Cutting Board Set L (CS-208)

The Snow Peak Cutting Board Set L provides a convenient cutting board for your Iron Grill Table System, as well as a safe and convenient way to transport a full-sized kitchen knife. When open, the raw wood cutting board drops into the Iron Grill Table frame and takes up one IGT unit. When closed, the wood acts as a case for the knife. The knife is held magnetically to the wood so that the knife will not accidentally drop out if the wood is opened at an awkward angle. The Santoku blade is stainless steel and 6.5" long, which is more than large enough for the vast majority of field cooking tasks. The wood also features four feet that enable the cutting board to be used as a standard cutting board on any tabletop or other flat surface.


Snow Peak Part Number -  CS-208

Universal Product Code -  4960589182091







SNOW PEAK IGT STAINLESS SINGLE UNIT TRAY (CK-051)

Snow Peak IGT Stainless Single Unit Tray (CK-051)

The Snow Peak IGT Stainless Single Unit Tray inserts into your Iron Grill Table frame to fill unused portions of your frame, provide a work surface, or act as a non-flammable and non-staining heat buffer for very hot IGT items such as the Snow Peak IGT BBQ Box. As its name would suggest, the IGT Stainless Single Unit Tray is constructed entirely of stainless steel and takes up one IGT unit space in your Iron Grill Table frame. Dimensions are 14" x 10" x 0.5".

 

Snow Peak Part Number -  CK-051

Universal Product Code -   4960589141081





SNOW PEAK IGT STAINLESS HALF UNIT TRAY (CK-026)

Snow Peak IGT Stainless Half Unit Tray (CK-026)

The Snow Peak IGT Stainless Half Unit Tray inserts into your Iron Grill Table frame to fill unused portions of your frame, provide a work surface, or act as a non-flammable and non-staining heat buffer for very hot IGT items such as the Snow Peak IGT BBQ Box. As its name would suggest, the IGT Stainless Half Unit Tray is constructed entirely of stainless steel and takes up one-half IGT spaces in your IGT frame. The IGT Stainless Half Unit Tray is identical to the lid included with the Snow Peak IGT Stainless Box Half Unit. Dimensions are 14" x 5" x 0.5".


Snow Peak Part Number -  CK-026

Universal Product Code -  4960589141067







SNOW PEAK IGT STAINLESS BOX HALF UNIT (CK-025)

Snow Peak IGT Stainless Box Half Unit (CK-025)

The Snow Peak IGT Stainless Box Half Unit is a stainless box that fits into your Iron Grill Table frame to provide both storage and a work surface. As its name would suggest, the CK-025 takes up one-half IGT spaces in your IGT frame. The detachable lid doubles as a stainless IGT tabletop insert. Construction is entirely of stainless steel and the Snow Peak logos are engraved into the lid and sides of the tray. Dimensions are 14" x 5" x 6".


If you not require the box and want only the lid, order the Snow Peak IGT Stainless Half Unit Tray.


Snow Peak Part Number -  CK-025

Universal Product Code -  4960589141050







SNOW PEAK IGT WOOD TABLE W BAMBOO (CK-126T)

Snow Peak IGT Wood Table W Bamboo (CK-126T)

The Snow Peak IGT Wood Table W Bamboo fills voids in unused areas of the Iron Grill Table with bamboo. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. Bamboo is also warm to the touch and very beautiful. The IGT Wood Table W Bamboo displaces two IGT units and maximizes tabletop space for cooking implements and ingredients. The IGT Wood Table W Bamboo can also serve as a makeshift cutting board.


The Wood Table W Bamboo fills in two IGT units (or "W" in Snow Peak parlance). If you want a smaller bamboo filler, look at the Snow Peak IGT Wood Table S Bamboo, which fills one IGT unit (or "S" in Snow Peak parlance).


Snow Peak Part Number -  CK-126T

Universal Product Code -  4960589142361







SNOW PEAK IGT WOOD TABLE S BAMBOO (CK-125T)

Snow Peak IGT Wood Table S Bamboo (CK-125T)

The Snow Peak IGT Wood Table S Bamboo fills voids in unused areas of the Iron Grill Table frame with bamboo and converts it into a counter. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. Bamboo is also warm to the touch and very beautiful. The IGT Wood Table S Bamboo displaces one IGT unit and maximizes tabletop space for cooking implements and ingredients. The IGT Wood Table S Bamboo can also serve as a makeshift cutting board.


The Wood Table S Bamboo fills in one IGT unit (or "S" in Snow Peak parlance). If you want a larger bamboo filler, look at the Snow Peak Wood Table W Bamboo, which fills two IGT units (or "W" in Snow Peak parlance).


Snow Peak Part Number -  CK-125T

Universal Product Code -  4960589142354







SNOW PEAK IGT MULTI FUNCTION TABLE BAMBOO (CK-116T)

Snow Peak IGT Multi Function Table Bamboo (CK-116T)

The Snow Peak IGT Multi Function Table Bamboo hooks into any one of the four sides of the modular Iron Grill Table Frame and greatly increases the working or dining tabletop space. Mounting hooks are integral with the unit and all that is required to mount to an Iron Grill Table Frame are two legs (sold separately). One Multi Function Table Bamboo will also hook onto another Multi Function Table Bamboo. The Multi Function Table Bamboo will fit Iron Grill Table Frames and Multi Function Table Bamboos of any height, so be sure to order legs of the correct length when ordering your Multi-Function Table Bamboo. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. Bamboo is also warm to the touch and very beautiful. Measures 34" x 20" x 1/2" to match the dimensions of the three-unit Iron Grill Table Frame. (Shown for illustration purposes with Snow Peak Iron Grill Table Frame Set and Snow Peak IGT Leg Set, both of which are sold separately.)


You will need a pair of legs for your Multi Function Table Bamboo. EE sells the IGT legs in the following heights:


The Multi Function Table Bamboo and its legs will store and transport with your Iron Grill Table Frame and its legs in the Snow Peak Tote Bag Jumbo.


The Multi Function Table Bamboo will enlarge your Iron Grill Table frame from side to side. To enlarge your Iron Grill Table from front to back, look at the Snow Peak IGT Slide Top Half, which is also made of bamboo but slides onto the front and rear of the Iron Grill Table frame.


Snow Peak Part Number -  CK-116T

Universal Product Code -  4960589142316







SNOW PEAK IGT HEIGHT ADJUSTER (CK-151)

Snow Peak IGT Height Adjuster (CK-151)

The Snow Peak IGT Height Adjuster increases the versatility and modularity of your Iron Grill Table even further by allowing mounting of the Snow Peak IGT Multi Function Table Bamboo at different heights. For example, you can set your Iron Grill Table frame at 830/standing/counter height and your bamboo side extension at 660/sitting height so that your guests can sit and eat while you service them standing.


Snow Peak Part Number -  CK-151

Universal Product Code -  4960589141388







SNOW PEAK IGT STANDING 830 LEG SET (CK-114)

Snow Peak IGT Standing 830 Leg Set (CK-114)

The Snow Peak IGT Standing 830 Leg Set consists of two legs that measure 33" x 1". A screw-in adjuster is installed in the bottom end of each leg to adjust for uneven ground. These 33" legs are suitable for standing applications, where your Iron Grill Table frame is set up at counter height approximately 34" off the ground. Two legs per set. If you want to use your Iron Grill Table while seated, then fit the Snow Peak IGT Sitting 660 Leg Set.


Snow Peak Part Number -  CK-114

Universal Product Code -  4960589141135







SNOW PEAK IGT SITTING 660 LEG SET (CK-113)

Snow Peak IGT Sitting 660 Leg Set (CK-113)

The Snow Peak IGT Sitting 660 Leg Set consists of two legs that measure 26" x 1". A screw-in adjuster is installed in the bottom end of each leg to adjust for uneven ground. These 26" legs are suitable for dining on your Iron Grill Table Frame while seated in something like the Snow Peak Red Folding Chair. If you want to use your Iron Grill Table while standing, then fit the Snow Peak IGT Standing 830 Leg Set.


Snow Peak Part Number -  CK-113

Universal Product Code -  4960589141128







SNOW PEAK TOTE BAG JUMBO (UG-072R)

Snow Peak Tote Bag Jumbo (UG-072R)

The Snow Peak Tote Bag Jumbo is an excellent way to store and transport large amounts of Iron Grill Table pieces as well as other large appurtenances like the Snow Peak Red Folding Chair. The Tote Bag Jumbo is similar to the older Iron Grill Table Storage Case, but deeper front to back to accommodate more contents. The Tote Bag Jumbo measures 36" x 18" x 9". A three-unit IGT frame measures 34" x 20" x 1" and the IGT pieces stack very tightly, so the Tote Bag Jumbo will easily accommodate multiple three-unit IGT frames, sets of legs, IGT Multi Function Table Bamboo side extensions, and IGT inserts.


Construction is of heavy-duty canvas and all edges and seams are double-layered canvas to prevent them from fraying, unraveling, or pulling apart. Accessory handles surround the Tote Bag Jumbo to facilitate handling and loading/unloading from vehicles. Contents are secured with two Fastex buckles and the main handles feature a surround to keep them tidy and take pressure away from the fingers. A mesh accessory pocket is on the side for smaller items.

 

Snow Peak Part Number -  UG-072R

Universal Product Code -  691688110596







SNOW PEAK IRON GRILL TABLE FRAME 830 SET (CK-147)

Snow Peak Iron Grill Table Frame 830 Set (CK-147)

The Snow Peak Iron Grill Table Frame 830 Set is a configurable, backyard or field table system that permits the user to change his IGT from simple table to stove to grill to continuous length of multiple tables for large parties. The component pieces break down into separate pieces for easy storage and transport.


The Iron Grill Table frame is the backbone of the system and accommodates the placement of three IGT units within the frame, as well as various bamboo extensions and wings that attach to the frame's perimeter. The Iron Grill Table Frame 830 Set includes four, 33" legs for standing applications where the frame is set a traditional counter height. Legs of different heights will also fit. The Iron Grill Table frame measures 34" x 20" x 1". The legs measure 1" x 33" each and are shorter in length than the table to facilitate storage or transport.

 

The frame's three IGT units will hold a combination of the following pieces:


The IGT frame can be expanded by fitting the following pieces to the frame's perimeter:

 

The IGT frame can be expanded by fitting the following pieces to the frame's bottom:


The IGT frame will accept the following legs:


If you are going to use your IGT frame seated, then look at the Snow Peak Red Folding Chair.


The IGT frame and its appurtenances will store and transport in the following soft luggage:


Snow Peak Part Number -  CK-147

Universal Product Code -  4960589141326







SNOW PEAK RED FOLDING CHAIR (LV-077RD)

Snow Peak Red Folding Chair (LV-077RD)

The Snow Peak Red Folding Chair will be a comfortable favorite around your campfire and field kitchen for years to come. The cotton canvas is a beautiful cardinal-red color that looks great against the black die-cast joints and aluminum tubing. The Red Folding Chair quickly and easily folds for transport or storage, and measures 27" long x 23" wide x 4" tall when folded. When deployed for sitting, the Red Folding Chair measures 23" long (front to back) x 23" wide. The seat is 19" off the ground and the top of the backrest is 34" high. The top of the armrests is 25" off the ground, so the Red Folding Chair is ideal with the vast majority of indoor and outdoor tables. The armrests are covered in padded canvas and the seat is taut so that there is no pressure on the bottoms of the thighs. Perfect when paired with the Iron Grill Table and IGT Sitting 660 Legs.


Snow Peak Part Number -  LV-077RD

Universal Product Code -  4960589003709







SNOW PEAK MY TABLE (LV-070RD)

Snow Peak My Table (LV-077RD)

The Snow Peak My Table is a folding camp table that weighs 4 lbs., measures 18" x 13" x 16" when open, and measures 17" x 13" x 3" folded. The My Table is constructed of aluminum, steel, and bamboo. In addition to being environmentally friendly, bamboo is considerably stronger than traditional table woods like maple. The My Table locks in the open position and its design is such that the more weight is placed on the table, the more securely the My Table locks in the open position. Nylon carry case included.


The My Table pairs perfectly, both dimensionally and aesthetically, with the Kermit Chair. While the My Table is constructed of bamboo and aluminum in Japan and the Kermit Chair is constructed of white oak in Tennessee, the two pieces pair well while still not looking matchy-matchy.


If you want a small table like the My Table but are looking for something that disassembles into a smaller size, look at the Kermit Table and Wide Kermit Table. Both tables sit 12" tall and are perfect for lounging, but the Wide Kermit Table is larger than the Kermit Table. Both tables are hand-made of white oak in Tennessee, and both tables disassemble similarly to very compact dimensions.


Snow Peak Part Number -  LV-070RD

Universal Product Code -  4960589142026





SNOW PEAK GIGAPOWER FUEL 250 (GP-250US)

Snow Peak GigaPower Fuel 250 (GP-250US)

The Snow Peak GigaPower Fuel 250 fuel canister contains an Isobutane/LPG fuel mixture in a compact canister. Snow Peak's testing has shown The GigaPower Fuel 250 will operate Snow Peak stoves in temperatures as low as 17 degrees F. GigaPower Fuel 250 canisters are equipped with self-sealing safety valves and employ the standard Lindal Valve threading for easy interchangeability with most common gas canisters from other manufacturers like the PRIMUS Power Gas systems. 370g full weight.


If your device runs on GigaPower gas canisters, then it is probably capable of being adapted to run on other gas systems as well using the various Kovea gas adapters. The Kovea LPG Adapter will let you run on the commonly available Coleman 1 lb. propane canisters, and the Kovea CB Adapter will let you run on the commonly available and very inexpensive CB butane canisters found at Asian markets.


Snow Peak Part Number -  GP-250US

Universal Product Code -  691688193926







SNOW PEAK GEOSHIELD STOVE (GS-360)

Snow Peak Geoshield Stove (GS-360)

The Snow Peak Geoshield Stove is the backpacking stove that thinks it's a tabletop stove. Its size and weight say backpacking, but it is equally suitable for tabletop use, and features built-in windscreens and heat shields to maximize heat reflectivity, minimize fuel consumption, and speed cooking times of large amounts of food. The Geoshield Stove is easily assembled and breaks down into small pieces for easy storage and transport. The Geoshield Stove has more structure and is more stable than other backpacking-sized stoves, so it is suitable for use with the larger pots and pans typically used for family camping. The Geoshield Stove offers two modes of gas use. Its Lindal Valve gas canister may be inverted for very hot fires, or the canister may be stood up for low-temperature cooking or simmering. An igniter and two drawstring pouches are included. 392g weight. (Shown for illustration purposes with Snow Peak GigaPower Fuel 250, which is sold separately.)


The Geoshield typically runs on Lindal Valve canisters like the PRIMUS Power Gas and Snow Peak GigaPower systems. However, the Geoshield is capable of adaptation with the various Kovea gas adapters. The Kovea LPG Adapter will let you run the Geoshield on the commonly available Coleman 1 lb. propane canisters, and the Kovea CB Adapter will let you run the Geoshield on the commonly available and very inexpensive CB butane canisters found at Asian markets.


Snow Peak Part Number -  GS-360

Universal Product Code -  691688091376







SNOW PEAK TREK 1400 TITANIUM COMPONENT COOKER (SCS-009T)

Snow Peak Trek 1400 Titanium Component Cooker (SCS-009T)

The Snow Peak Trek 1400 Titanium Component Cooker is an ultra-lightweight, two-piece cookset comprised of a 47 oz. pot and 17 oz. multipurpose lid/pan/bowl. The Trek 1400 Component Cooker Titanium is constructed entirely of titanium, which has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong and will not break (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Mesh nylon bag included. 210g weight.


Snow Peak designed the Trek 1400 Titanium Component Cooker to be part of a greater whole, and nesting possibilities are many. One GigaPower Fuel 250 and one Titanium GigaPower Stove With Auto Igniter will nest within the Snow Peak Trek 900 Titanium Component Cooker. Alternatively, a complete Snow Peak Mini Solo Cook Set Titanium with additional items nested within it will nest within the Trek 900 Titanium Component Cooker, which in turn will stack within the Trek 1400 Titanium Component Cooker to create a very lightweight and compact cookset for backpacking, bikepacking, and adventure motorcycling pursuits.


Snow Peak Part Number -  SCS-009T

Universal Product Code -  04960589115716







SNOW PEAK TREK 900 TITANIUM COMPONENT COOKER (SCS-008T)

Snow Peak Trek 900 Titanium Component Cooker (SCS-008T)

The Snow Peak Trek 900 Titanium Component Cooker is an ultra-lightweight, two-piece cookset comprised of a 30 oz. pot and 8 oz. multipurpose lid/pan/bowl. The Trek 900 Titanium Component Cooker is constructed entirely of titanium, which has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong and will not break (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Mesh nylon bag included. 175g weight.


Snow Peak designed the Trek 900 Titanium Component Cooker to be part of a greater whole, and nesting possibilities are many. One GigaPower Fuel 250 and one Titanium GigaPower Stove With Auto Igniter will nest within the Trek 900 Titanium Component Cooker. Alternatively, a complete Snow Peak Mini Solo Cook Set Titanium with additional items nested within it will nest within the Trek 900 Titanium Component Cooker, which in turn will stack within the Snow Peak Trek 1400 Titanium Component Cooker to create a very lightweight and compact cookset for backpacking, bikepacking, and adventure motorcycling pursuits.


Snow Peak Part Number -  SCS-008T

Universal Product Code -  4960589115709







SNOW PEAK IGT BBQ BOX (CK-130)

Snow Peak IGT BBQ Box (CK-130)

The Snow Peak IGT BBQ Box is a charcoal grill that may be used standalone or as part of Snow Peak's modular Iron Grill Table System. Made entirely of stainless steel, the IGT BBQ Box is easy to use, easy to clean, and durable. To use, simply fill the removable pan with charcoal and drop your favorite meal on top of the removable grill net. The charcoal pan can be raised or lowered with a lever to increase or decrease cooking heat as desired. The IGT BBQ Box's legs stow inverted to minimize wasted storage space, and a nylon strap is provided to hold the entire assembly together during storage or transport. The IGT BBQ Box is entirely self-contained and measures only 14" x 10" x 7" when stowed.

 

The BBQ Box is basically a half version of the Snow Peak IGT Double BBQ Box with some small differences:

  • the BBQ Box fills one IGT unit (or "S" in Snow Peak parlance) while the Double BBQ Box fills in two IGT units (or "W" in Snow Peak parlance)
  • the legs on the BBQ Box invert and store outside the body while the Double BBQ Box fills in two IGT units (or "W" in Snow Peak parlance)
  • the BBQ Box uses a lever to adjust the height of the charcoal pan (grill net stays stationary) while the Double BBQ Box uses a hand crank to adjust the height of the grill nets (charcoal pan stays stationary)
  • the BBQ Box has a shallow lid while the Double BBQ Box has no real lid to cover foods while cooking


To light your charcoal for the IGT BBQ Box, look at the excellent Kovea Charcoal Starter. Like the BBQ Box, the Kovea Charcoal Starter is constructed of stainless for easy maintenance and also folds flat for compact storage and transport. In fact, the Charcoal Starter will even nest inside the IGT BBQ Box.

 

The BBQ Box is modular and designed to work with other Snow Peak items. It comes standard with a yakitori-style grill net, but will also accept:


Snow Peak Part Number -  CK-130

Universal Product Code -  4560453420887







SNOW PEAK TITANIUM MINI SOLO COMBO 2.0 (SCS-004TR)

Snow Peak Titanium Mini Solo Combo 2.0 (SCS-004TR)

The Snow Peak Titanium Mini Solo Combo 2.0 is an evolution of the older Mini Solo Cook Set Titanium. The cup now holds nearly twice as much as the older cup, the pot holds slightly more than before, the handles are streamlined in shape, and the lid now features a silicone tab that can be grabbed when the lid is hot. The Titanium Mini Solo Combo 2.0 is constructed of titanium, which has low thermal conductivity, no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), is very strong and scratch-resistant (unlike aluminum), and will not break or melt (unlike plastic). Most importantly, titanium is easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Mesh nylon bag included. 155g weight.


Snow Peak designed the Titanium Mini Solo Combo 2.0 to be part of a greater whole, and nesting possibilities are many. Two GigaPower Fuel 110 canisters nest within the Titanium Mini Solo Combo 2.0. Alternatively, one GigaPower Fuel 110 and one GigaPower Stove nest within the Titanium Mini Solo Combo 2.0. The Snow Peak Titanium Double Wall Cup 450 and one Gigapower Stove nest within the Titanium Mini Solo Combo 2.0. A complete Titanium Mini Solo Combo 2.0 with additional items nested within it will nest into the Snow Peak Trek 900 Titanium Component Cooker, which will nest into the Snow Peak Trek 1400 Titanium Component Cooker to create a very capable and yet compact and lightweight backpacking field kitchen.


The Snow Peak Titanium Mini Fork stacks perfectly with the Titanium Mini Solo Combo to form a very compact mess kit.


Snow Peak Part Number -  SCS-004TR

Universal Product Code -  4960589002894







SNOW PEAK TITANIUM CAFE PRESS (CS-111)

Snow Peak Titanium Cafe Press (CS-111)

The Snow Peak Titanium Cafe Press is a lightweight and portable coffee press for use in the field. Titanium has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), is very strong and scratch-resistant (unlike aluminum), and will not break or melt (unlike plastic). Most importantly, titanium is easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. The titanium handles fold for compact storage, yet allow comfortable handling while boiling. Using the Titanium Cafe Press is very simple; it works just like any other french press. Mesh nylon bag included. 200g weight.


The Titanium Cafe Press is suited for making a single serving of coffee while backpacking. If you are car camping or want to make coffee for several people, check out the much larger GSI Outdoors 50 oz. Blue Javapress and GSI Outdoors 50 oz. Blue Javadrip for your needs.


Snow Peak Part Number -  CS-111

Universal Product Code -  4960589181117







SNOW PEAK TABLEWARE SET L FAMILY (TW-021F)

Snow Peak Tableware Set L Family (TW-021F)

The Snow Peak Tableware Set L Family is a 16-piece set composed of four large plates, four large bowls, four medium bowls, and four small bowls. The plates and bowls are constructed of 18-8 stainless steel for corrosion resistance and are 0.4mm thick to be lightweight yet tough. The plates and bowls nest and stack with one another to minimize storage size and facilitate transport. The pieces are artfully shaped to nest to the maximum extent, and all 16 pieces of the Tableware Set L Family measure only 8.3" wide by 3" tall when nested and stacked together. No other family dining set can even come close to that. 62 oz. weight. Nylon mesh bag included.


Snow Peak Part Number -  TW-021F

Universal Product Code -  4960589170180







SNOW PEAK TREK TITANIUM PLATE (STW-002T)

Snow Peak Trek Titanium Plate (STW-002T)

The Snow Peak Trek Titanium Plate is an ultra-lightweight plate. Titanium has low thermal conductivity, no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), is very strong and scratch-resistant (unlike aluminum), and will not break or melt (unlike plastic). Most importantly, titanium is easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. 7.5" diameter. 63g weight.


The Snow Peak Titanium Bowl and Titanium Plate are suited for activities like backpacking where size and weight are at a premium and you are willing to pay the pricetag for those virtues. For family camping or car camping, we recommend the Snow Peak Tableware Set L Family, a 16-piece set composed of four large plates, four large bowls, four medium bowls, and four small bowls that all nest and stack together to form a very compact service set for four or even more people.


Snow Peak Part Number -  STW-002T

Universal Product Code -  691688116079







SNOW PEAK TREK TITANIUM BOWL (STW-003T)

Snow Peak Trek Titanium Bowl (STW-003T)

The Snow Peak Trek Titanium Bowl is an ultra-lightweight Bowl. Titanium has low thermal conductivity, no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), is very strong and scratch-resistant (unlike aluminum), and will not break or melt (unlike plastic). Most importantly, titanium is easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Like almost all Snow Peak products, the Titanium Bowls stack within one another to be as compact as possible for storage and transport. 5.5" diameter. 45g weight.


If you are going to put something hot in the Titanium Bowl like soup, then we recommend putting a Snow Peak Titanium Plate under the bowl to act as a saucer that will hold your spoon and also insulate against heat. You need a plate anyway in your personal mess kit, so this combination works quite well.


The Titanium Bowl and Titanium Plate are suited for activities like backpacking where size and weight are at a premium and you are willing to pay the pricetag for those virtues. For family camping or car camping, we recommend the Snow Peak Tableware Set L Family, a 16-piece set composed of four large plates, four large bowls, four medium bowls, and four small bowls that all nest and stack together to form a very compact service set for four or even more people.


Snow Peak Part Number -  STW-003T

Universal Product Code -  691688116086







SNOW PEAK LID FOR TITANIUM DOUBLE WALL CUP 450 (MGC-053)

Snow Peak Lid For Titanium Double Wall Cup 450 (MGC-053)

The Snow Peak Lid for Titanium Double Wall Cup 450 is a plastic lid with a sealing gasket that fits onto the top of the Snow Peak Titanium Double Wall Cup 450 and converts it into an insulated travel mug. Fitment of the Lid both prevents spilling and adds further insulating properties to the already-efficient Double Wall Cup 450. A vent hole in the lid prevents gurgling and spillage.


Snow Peak Part Number -  MGC-053

Universal Product Code -  4960589171842







SNOW PEAK TITANIUM DOUBLE WALL CUP 450 (MG-053R)

Snow Peak Titanium Double Wall Cup 450 (MG-053R)

This is the Gold Standard of camping mugs. The Snow Peak Titanium Double Wall Cup 450 is an ultra-lightweight mug that provides superior heat and cold insulation due to its double-wall construction. Hot liquids stay hotter and cold drinks stay colder inside the Titanium Double Wall Cup 450. Furthermore, titanium has low thermal conductivity (so the heat from hot drinks will never reach the lip of the cup), no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic liquids or foods (unlike aluminum and stainless steel), and is very strong and will not break or melt (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. Folding titanium handles make storage and transport very compact. 14 oz. capacity. 118g weight.


If you want to take your Titanium Double Wall Cup on the road with you, there is available the the Snow Peak Lid for Titanium Double Wall Cup 450, which fits onto the top of the Titanium Double Wall Cup and converts it into an insulated travel mug.

 

Like many of Snow Peak's pieces, the Titanium Double Wall Cup 450 is designed to nest inside other Snow Peak Items to make them as compact as possible during storage and transport. A small backpacking stove like the Snow Peak GigaPower Stove will nest inside the Titanium Double Wall Cup 450, which will nest inside the Snow Peak Ti Mini Solo Combo 2.0, which will nest inside the Snow Peak Trek 900 Titanium Component Cooker, which will nest inside the Snow Peak Trek 1400 Titanium Component Cooker to create a very small and lightweight backpacking cookset.


The Titanium Double Wall Cup 450 is all about the high technology and performance features. If you tend toward something more warm, traditional, and beautiful in your drinkware, look at the Swiss Advance Enamel Mug Coelo. It doesn't have the same number of bullet points as the Double Wall 450, but we guarantee that it will deliver your coffee or other drinks from the table to your mouth every bit as well. And the beautiful Enamel Mug Coelo will make your drinks taste better because it presents so well and puts you in a very receptive state.


Snow Peak Part Number -  MG-053R

Universal Product Code -  4960589172436





SNOW PEAK WAPPER BUKI TITANIUM FULL CUTLERY SET (SCT-001)

Snow Peak Wapper Buki Titanium Full Cutlery Set (SCT-001)

The Snow Peak Wapper Buki Titanium Full Cutlery Set includes a knife, fork, and spoon constructed from solid titanium. Titanium is substantially lighter than stainless steel. More important than weight is titanium's suitability for utensil construction. Titanium has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic foods (unlike aluminum and stainless steel), and is very strong and will not melt or break (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. 52g weight.


Nylon carry case is included. Available colors for the carry case are blue, green, red, tan, and yellow.


If you want a Spork as well in your field cutlery set, the Snow Peak Titanium Spork just barely fits into the Wapper Buki's nylon case with the knife, fork, and spoon.







SNOW PEAK TITANIUM SPORK (SCT-004)

Snow Peak Titanium Spork (SCT-004)

The Snow Peak Titanium Spork is an ultra-lightweight hybrid tool that can be used as a spoon or fork, and the curved edge can also be used to cut softer items. The Titanium Spork represents a double weight reduction, as titanium is substantially lighter than stainless steel, and one need carry only one utensil rather than two or three. More important than weight is titanium's suitability for utensil construction. Titanium has no metallic smell or taste (unlike aluminum or stainless steel), will not corrode or stain when left wet or exposed to acidic foods (unlike aluminum and stainless steel), and is very strong and will not melt (unlike plastic). Titanium is also easily serviced in the field, as a simple rinse with water and a wipe-down with a cloth are all that is necessary. If you like, the Titanium Spork will fit into the nylon carry case of the Snow Peak Three-Piece Titanium Silverware Set. 16g weight.


Snow Peak Part Number -  SCT-004

Universal Product Code -  4960589115877







SNOW PEAK MINI FLAME NOCTURNE LANTERN (GL-140-US)

Snow Peak Mini Flame Nocturne Lantern (GL-140-US)

If you get no love from the vast majority of cold, bluish LED lanterns out there, the Snow Peak Mini Flame Nocturne is for you. The Mini Flame is easily lit with a lighter or match and the flame is an actual flame that burns a warm yellow-white and flickers in the breeze. The flame is adjustable. This isn't a white-hot gas lantern that hisses and requires globes. Rather, it is more like a gas-powered candle that is silent and an ideal way to burn up the remainders of your old fuel canisters while creating an evening of ambience. A key feature that distinguishes the Mini Flame Nocturne from many other lantern is its suitability for use with all gas canister systems with standard Lindal Valve threading like the Snow Peak GigaPower, PRIMUS Power Gas, and numerous other systems. Burn time is approximately 11 hours on a 110g fuel canister and 35 hours on a standard 250g fuel canister. Comes standard with white transport case. 110g.


Snow Peak Part Number -  GL-140-US

Universal Product Code -  4960589181667







SNOW PEAK WABUKI CARRY-ON CHOPSTICKS L (SCT-111)

Snow Peak Wabuki Carry-On Chopsticks L (SCT-111)

The Snow Peak Carry-on Chopsticks L are the "large" size chopsticks and measure 9" in length when assembled. The chopsticks disassemble like miniature pool cues, and the wooden tips nest inside the handles for easy transport and compact storage. A key difference between these and previous Snow Peak designs is the square cross-section of the handles (which all good chopsticks have). The older Snow Peak chopsticks had cylindrical handles and were terrible to use. (There is a reason pencils are hexagonal in cross-section rather than round.) These chopsticks handle just like any other good chopsticks, but take down for compact storage and transport. The tips are constructed from bamboo while the handles are made of stainless steel. The assembly hardware is solid brass. When disassembled, the chopsticks measure 5" long. The included red nylon carry case measures 5.5" long and includes a neck strap. 49g total weight for chopsticks and carry case.


The Snow Peak Mini Titanium Fork will fit inside the red nylon carry case and pair nicely with the chopsticks to form a very compact camp utensils set.


An alternative to the Carry-On Chopsticks L is the PRIMUS Campfire Chopsticks, which break down in a similar manner but have an all-wood construction for those who prefer that look and feel.


Snow Peak Part Number -  SCT-111

Universal Product Code -  4960589116249







SNOW PEAK HEAVY DUTY MULTI-PURPOSE COOK SET I (CS-021)

Snow Peak Heavy-Duty Multi-Purpose Cook Set I (CS-021)

The Snow Peak Heavy Duty Multi-Purpose Cook Set I has been discontinued according to Snow Peak USA, yet this favorite continues to peek its head now and then. Snow Peak USA was able to locate a few more of the CS-021 cook sets for EE and they are available again for the time being. The Heavy Duty Multi-Purpose Cook Set I set includes three pots, three lids, a mesh strainer/colander, skillet, wooden handle, pot holder, and mesh transport bag. This kit is worlds ahead of the Al Dente Cook Set because it includes the skillet, which means you can actually cook more than boiled foods in camp. The small pot has a 3.2-quart capacity, the medium a 4.5-quart capacity, and the large a 7-quart capacity. All of the pieces nest together into a cylinder about 10" wide and 8" tall. Total weight of the pieces is 7.3 lbs. Supplies are limited, so speak now if you want this cookset.


If you feel this cookset is too large for you, buy it anyway, don't carry the large pot and lid, and stack the collander, medium pot, and all the smaller bits in the medium pot on top of the skillet. Having a skillet is important, and it's also important that the skillet be as large a diameter as possible so that you can cook things like eggs or bacon without crowding and steaming.


Snow Peak Part Number -  CS-021

Universal Product Code -  4960589180103







SNOW PEAK FOLDING TORCH (GT-110R)

Snow Peak Folding Torch (GT-110R)

The Snow Peak Folding Torch is an evolution of the older GigaPower 2 Way Torch, and the primary difference is the wood handle that hinges open for use and closed for storage and transport. The open handle is easier to use than the older, handle-less GigaPower 2 Way Torch because the user can hold the handle at the balance point rather than the gas canister. Like the GigaPower 2 Way Torch, the Folding Torch has a 14,000 BTU output to light charcoal and campfires, and is equally suitable for use as a torch for field repairs. The Folding Torch offers the flexibility of being powered by standard Lindal Valve canisters like the Snow Peak GigaPower and PRIMUS Power Gas systems. A generator within the torch's head permits the unit to operate at full heat immediately after ignition and with the unit inverted. Included is a CB adapter that will let the Folding Torch work with inexpensive CB gas cartridges. The CB adapter will also permit one to use other Lindal Valve equipment with CB cartridges. Nylon carry pouch included.


Snow Peak Part Number -  GT-110

Universal Product Code -  4960589012824